Elemental Dice Silver vs Silver

I wrote a post about my Elemental Dice a little while ago and the Silver dice got an entire section for themselves. I had owned the plated one longer and it had been in the aluminium stand. This is what they used to look like:

Plated silver to the left, severely oxidized after months, solid silver to the right, somewhat oxidized.

So, my guess was that the aluminium stand did something bad to the silver.

Since then the solid silver has been standing in the “faux leather dice roll mat” (available in E.D.2) and the plated silver has been standing in the aluminium stand. Now, a month and a half later I found that if any of them had any miscoloration it was the solid one, on the 6th face, that had been exposed to the faux leather.

I washed them both carefully in warm water and manual dish washer (which typically is used for utensils of metal), and took a few photos (with my new TX-158 “microscope”):

Solid Silver
Plated Silver

What you can clearly see here is that the solid one is laser engraved leaving the letters matte. The plated one is plated after the laser engraving, so also the letters are shiny. You can see this with your eye if you just look at them so this is an easy way to tell them apart (you can also determine that the solid one is a bit heavier, but it is not so obvious when you have them in your hand).

I took another picture of both of them at the same time.

Solid silver to the left, plated to the right

You can very clearly see that the inside of the “g” shines on the plated one and is matte with the solid.

But I also now see that more things are different. The plated one has had a thin layer of silver added afterwards, and that silver seems to have attached in a naturally shiny (almost liquid) way. The solid die on the other hand seems to have been polished to be shiny, leaving a very fine brushed surface.

To the naked eye, they also do not look exactly the same. The solid one appears to be more grayish and the plated one more warm yellow and perhaps even more shiny. If this is a matter of different age (time in the poluted air), different surface structure, or slightly different silver alloys I can not tell. Also the solid one seems to be blackish on 6th face.

Here is a picture of the 6th face of both dice. The solid die, to the right, has some black stains, and I suppose that is silver oxide (left one has been 45 days in aluminium stand, right one has been 45 days on faux leather).

Plated silver to the left, solid silver to the right.

But for now, it seems I was wrong about the aluminium oxidizing silver. I washed them today and I will put them back as they were, solid on faux leather and plated in the aluminium stand.

  1. Elemental Dice 1 – 3 | TechFindings - pingback on 2021/10/14 at 20:02
  2. Technaxx TX-158 Microscope Review | TechFindings - pingback on 2021/10/14 at 21:09

Leave a Comment


NOTE - You can use these HTML tags and attributes:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Time limit is exhausted. Please reload CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Trackbacks and Pingbacks: